Characteristics Of Inflatable Boat And How To Choose
The performance and advantages of inflatable products: 1. All the imported special air boat cloth is adopted, with excellent air tightness, wear resistance and long service life. 2, the use of imported air valve, convenient, safe and reliable. 3. All the bonding parts are bonded with imported glue. The peeling strength and performance of high temperature resistance, hydrolysis resistance and UV resistance are much better than those of domestic glue. 4. The imported material has high color fastness, the color of the cloth surface lasts as long as new, and the imported special wear-resistant double-color fender makes the hull durable. The airbag of the hanging boat shell is manufactured by the process of adhesive and high cycle heat combination, with good air tightness, high strength, durability and first-class quality, and the speed is 40-60km/h. It will last at least a week after inflating.
1. Appropriate bottom plate The structure of inflatable boat bottom plate directly affects portability, ease of installation, storage volume and performance on water. Hard-bottomed inflatable boats made of synthetic plastic, fiberglass or aluminum alloy with V-shaped bottoms fly well, but must be transported and stored by trailers and hangers. Boats with flexible fabric bottoms can be folded very compact, more portable and wear well, but at the expense of some water performance. If you want a boat that can take off and travel at a speed of at least 5mph (8 KPH), then a semi-hard bottom boat is a must. 2. Choose the right material: Hypalon rubber cloth or PVC? What kind of hull material you use depends on the circumstances in which you generally use it. Two options: PVC with polyurethane as cover and Hypalon (mask neoprene nylon). Both materials are strong, durable and reliable, and can be used in any environment. But if you spend most of your time sailing in the tropics, the Hypalon rubber boat will be more durable because of its UV protection. The PVC and Hypalon boats are very different from each other a lot of the time, but both are very reliable. Some manufacturers use pressure welding technology to weld pieces of PVC together, and the seams are even stronger than the material itself. At the same time, because the PVC surface is denser than Hypalon's, the air pressure can be a little lower than Hypalon's rubber boat. Hypalon inflatable boats (and some PVC inflatable boats) are held together with a high-strength adhesive. Compared with the automatic welding of PVC factory, this is a labor-intensive production method, but also the weakness of some cheap boats, so this manual work must pay attention to ensure the quality. 
Beyond the "bigger is better" argument, there are several considerations. One is the shelf life of the boat, a good factory and retailer can provide a relatively long shelf life. Accessories, valves and hardware: If you are buying a boat for the first time, it is easy to overlook the quality of the boat's equipment and accessories. The gap in cheap ships is huge. But unless you use it yourself, the buyer is not aware of the impact of these defective products. Good manufacturers will provide good stainless steel pull rings, strong aluminum paddles, reliable inflation valves and efficient air pumps. These will help you complete the inflatable process with minimal effort, ensuring the portability of the inflatable boat, and the overall inflatable boat will be safer and more reliable.
